Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

How Spark Plugs Work:

The first thing you should know about spark plugs is that they are only used in petrol engines. Diesel engines use a different component called a glow plug.

This is what a typical spark plug looks like

The purpose of a spark plug is to repeatedly create a strong electrical spark. To understand why your engine needs a spark, you need to know a little bit about how an engine works.


There are 4 main steps that take place inside your engine to make it run:
  • Step 1) A mixture of petrol and air is sucked into the combustion chamber by the piston moving down inside the cylinder.
  • Step 2) The petrol & air mixture is squeezed in the combustion chamber by the piston moving up inside the cylinder.
  • Step 3) The petrol & air mixture is ignited by the spark plug. this causes an explosion inside the combustion chamber. The force of the explosion pushes the piston back down inside the cylinder.
  • Step 4) The spent gasses that result from the explosion are then forced out of the combustion chamber by the piston. 
While the engine is running this whole process is repeatedly taking place thousands of times a minute. Interestingly, the sound that your engine makes is actually the sound of thousands of those little explosions taking place inside your cylinders. The animation below of a standard 4 cylinder engine is slowed down so that you can see the process



The video below probably makes it easier to understand. It shows what actually happens inside a real working engine. It's slowed down dramatically so you can see what's going on. First you can see the petrol & air mixture rushing in to the combustion chamber, through the inlet valve. The piston then comes into shot, compressing the mixture, the spark plug fires and ignites the fuel mixture, the force of the explosion pushes the piston back down, the exhaust valve opens and the piston pushes the old gasses out.

The spark plug converts electrical energy into a spark. The electrical energy comes from the battery, which is then amplified by ignition coils, it's then routed to the individual spark plugs via ignition leads. The spark plug itself creates the spark by forcing the electrical energy to jump the gap between the central electrode and the earth electrode
 

When should you change your spark plugs?
Spark plugs wear out and need to be changed. The recommended change intervals vary from car to car but as a rule of thumb it should be every 15,000-20,000 kms. Worn plugs will result in reduced fuel economy and reduced engine power.

Which spark plugs do I need?
The easiest way to select the correct spark plugs for your car is by using our reg lookup system. Our system will show you multiple brands of plug, all of which will be suitable for your car, you just need to check the descriptions carefully in-case of  limitations and then choose your preferred brand or price point.

How do I fit new spark plugs?
Fitting new spark plugs is one of the easier DIY jobs you can do with very little equipment or experience. The key points to remember are:
  • Take extra car not to cross thread the new plugs when fitting them, they should go in with very little resistance
  • Don't over tighten the plugs - Check the correct torque settings & use a torque wrench where possible
  • Make sure you re-fit the HT/ignition leads in the same position (it may help to number them)
Watch our 'How To' video for a full demo:

For more handy 'How To' guides why not subscribe to our Youtube channel

Awh it only needs a ball joint!


I think we have all had that conversation with the local mechanic or garage that your car needs a ball joint replacing and simply pay the bill and move on!

But we here at MicksGarage would like to explain to you what they are and put the power in your hands when it comes to your car maintenance as the saying goes “knowledge is power”. 

In simple terms they are what they say on the tin, a Ball in a joint! But if I were to say that ball joint is a key part of every vehicle and correct maintenance may save you money. It might make things a little more interesting!

The basic idea of the ball joint is to join two parts together but allow controlled movement in a multiple of directions, UP, DOWN, LEFT, and RIGHT and any combinations of these at the same time.

Cross Section of ball joint

As I mentioned above that ball joints are key to every vehicle on the road i.e. every vehicle will have them fitted, but where & why?

Our vehicles are designed to cope with bumpy roads, country lanes, the dreaded speed bumps, I think it fair to say the wheels move up and down a lot, now match this movement with the fact that front wheels need turning left and right. You might ask how do you actually fit a wheel to the vehicle and creator for all this movement? The answer is simple a Ball Joint.

Where the ball joint fitted?  99% of vehicles will have more than one but let’s take it slow. Below is a picture of where ball joints would most commonly fitted. Here you can see that this joint is key to ensuring that the wheel stays where it is meant to. 

Front Suspension Ball joint Location 

Any excess wear in the ball joint will result in the wheel moving in an uncontrolled manor. This uncontrolled movement will cause increased wear & strain on suspension components along with a feeling of vague steering or a tendency for the vehicle to wonder while driving in a straight line.

I did say this article could save you money and this is where it starts. We spoke about excess wear to suspension components and I could fill the pages with, what suspension components are,? do? etc...   (I do hope to in future with further articles) but let’s stay on track (excuse the pun).

The front-line in suspension components is actually your tyre! Its filled with air under pressure and perfect for taking the brunt of the road before the mechanical components take over (springs shocks etc...) but the money saving comes with ensuring the ball joints do not have excess play, this excess play will result in increased tyre wear and reduced tyre life. We know how pricey replacing four tyres can be.

Excess tyre ware is actually because the rolling resistance has increased and the tracking (the angle the wheels are pointing in) is out of alignment, this will increase your fuel consumption as your engine has to work harder to push past this resistance.

In the automotive world we tend to say the ball joint is fitted to the lower suspension arm or wishbones but the actually term Ball Joint can be taken as an engineering term of a ball in socket joint! If we take this on board we can see that nearly EVERY part of the suspension on your vehicle will have a Ball Joint fitted or attached to it! Below are a list of suspension components that may have ball joint fitted to them but are referred to differently in the automotive world because of there location or job.

          • Lower Wishbone 
          • Upper Wishbone 
          • Inner tie rod
          • Tie rod end
          • Drop links
          • Suspension mounting 
          • Control Arms
If we take the above list as a reference and have a look at the front suspension of a common vehicle let’s say an 2010 Audi A4.


Front Suspension 2010 Audi - A4

We can count five ball joints per side and a total of ten making up the front suspension, any excess ware on any of the above would hamper and add extra pressure on each of the other components.

All in all I think it is fair to say that ball joints are extremely important when it comes to vehicle maintenance and should not be over looked or put off.

“Awh sure it only needs ball joint” is not something that should be taken lightly. But I do hope you may have an extra incite that will aid you with your next service or future 2nd hand buy!

Chris Driver
Words by Chris Driver, MicksGarage !